adccommunitymod (AutomationDirect) asked a question.
C-more micro PTC-017 error
Created Date: December 11,2007
Created By: banderso12
**** This post has been imported from our legacy forum. Information in this post may be outdated and links contained in the post may no longer work.****
I am a beginner with the C-more micro software. I encounter the PTC-017 error when trying to transfer the demo project to the display. Is there a list of errors somewhere in the software documentation? Is there a tutorial for beginners?
Created Date: December 12,2007
Created by: banderso12
I tried a different computer, one with a fresh copy of WinXP Pro. The error did not recur on the new system.
Created Date: December 18,2007
Created by: HMI Eng
This error is not in the error list in the Help files. But it is in the screen capture.
If you open Help, search for "PTC Errors " (with the quotes) the only topic you get shows a screen capture of the PTC-017 Error. Basically you are:
1) not connected to the panel
2) Selected the wrong com port
3) did not select F!-F5 on the panel to put it in the setup screen.
Most likely you had the wrong com port selected.
1) Go to the Device Manager on you PC (there is a button in the project transfer screen that will open the device manager).
2) Select Ports (COM & LPT)
3) Find which COM Port that says: "Koyo USB-Serial Com Port "
This is the COM PORT you select in the C-more Micro Software when transfering.
Created Date: December 11,2007
Created by: banderso12
I am a beginner with the C-more micro software. I encounter the PTC-017 error when trying to transfer the demo project to the display.
Is there a list of errors somewhere in the software documentation? Is there a tutorial for beginners?