adccommunitymod (AutomationDirect) asked a question.
Created Date: April 10,2014
Created By: sgsims
**** This post has been imported from our legacy forum. Information in this post may be outdated and links contained in the post may no longer work.****
Over the years I have found this Forum to be very helpful and I have never had a chance to give back or offer any content. Mostly due to my lack of expertise. The other day I received some great help on the Host Eng Forum regarding the use of number formats. I decided to write up a little overview so I could make sense of the great advice I received. This would be an initial road map for a new user of DL plcs or PLC programming in general. Hopefully it is factually accurate and I don't lead anyone astray. If anyone has any content to add or corrections to provide feel free to offer your edits. Cheers::D
Created Date: April 10,2014
Created by: bcarlton
Here is my own little write-up on number types
And also this web page discussing other factors
Created Date: April 10,2014
Created by: sgsims
B_Carlton...yes those are great...I actually used some of the information in your document when writing mine. You have always been a great contributor! You know what they say...Imitation is the most sincere form of flattery!
Created Date: April 10,2014
Created by: sgsims
Over the years I have found this Forum to be very helpful and I have never had a chance to give back or offer any content. Mostly due to my lack of expertise.
The other day I received some great help on the Host Eng Forum regarding the use of number formats. I decided to write up a little overview so I could make sense of the great advice I received.
This would be an initial road map for a new user of DL plcs or PLC programming in general. Hopefully it is factually accurate and I don't lead anyone astray. If anyone has any content to add or corrections to provide feel free to offer your edits.
Cheers::D