adccommunitymod (AutomationDirect) asked a question.
Created Date: March 06,2003
Created By: HDunlap
**** This post has been imported from our legacy forum. Information in this post may be outdated and links contained in the post may no longer work.****
I currently have a 9 slot DL260 with 2 CTRIO modules installed in slot 1 and 2. My issue is that whenever the PLC is powered down, I loose the current counts established. I did download the latest Workbench software (2.0)and the instructions to resolve this problem. I can write back to the CTRIO in slot 1 channel one, but not channel 2. I'm not sure what I'm doing wrong. The other thing, I can't save either count in the CTRIO in Slot 2. If someone could give a Step by Step through this issue, I would be greatly appreciated. Thank you Harry Dunlap hajd@bibleonstage.com
Created Date: March 06,2003
Created by: HDunlap
I currently have a 9 slot DL260 with 2 CTRIO modules installed in slot 1 and 2. My issue is that whenever the PLC is powered down, I loose the current counts established. I did download the latest Workbench software (2.0)and the instructions to resolve this problem. I can write back to the CTRIO in slot 1 channel one, but not channel 2. I'm not sure what I'm doing wrong. The other thing, I can't save either count in the CTRIO in Slot 2. If someone could give a Step by Step through this issue, I would be greatly appreciated. Thank you
Harry Dunlap
hajd@bibleonstage.com