adccommunitymod (AutomationDirect) asked a question.
Created Date: March 12,2007
Created By: Paul Matejcek
**** This post has been imported from our legacy forum. Information in this post may be outdated and links contained in the post may no longer work.****
Who's your favorite vendor of flexible, inexpensive isolated signal transmitters? I need to monitor a 0-50mV DC signal. I also need to monitor a DC voltage that in a given machine will vary from 0 to 'n, ', where 'n ' is fixed, and most often 12 volts, but might be anywhere from 4 volts DC to 100 VDC. I need to isolate and convert those signals to drive my F0-4AD2DA-2 with 0-10vdc. It seems like there should be flexible transmitters available for less than 200 bucks. Got any great sources? Paul Matejcek
Created Date: March 13,2007
Created by: KPrice
Paul Matejcek, take a look at these. www.ohiosemitronics.com www.crmagnetics.com
Hope this helps.
Created Date: April 10,2007
Created by: Paul Matejcek
Thanks for the leads -- I didn't see your response until today.
I checked them out. I'm getting a good deal where I am!
Paul
Created Date: April 10,2007
Created by: KPrice
Paul, It sounds like you are getting a good deal on transmitters from your current supplier. I'm always interested in looking at other vendors ' transmitters. What vendor are you using now? Thanks.
Created Date: March 12,2007
Created by: Paul Matejcek
Who's your favorite vendor of flexible, inexpensive isolated signal transmitters?
I need to monitor a 0-50mV DC signal. I also need to monitor a DC voltage that in a given machine will vary from 0 to 'n, ', where 'n ' is fixed, and most often 12 volts, but might be anywhere from 4 volts DC to 100 VDC. I need to isolate and convert those signals to drive my F0-4AD2DA-2 with 0-10vdc. It seems like there should be flexible transmitters available for less than 200 bucks. Got any great sources?
Paul Matejcek