adccommunitymod (AutomationDirect) asked a question.
CLICK: get elapsed time in seconds from prox input
Created Date: October 14,2012
Created By: quaizywabbit
**** This post has been imported from our legacy forum. Information in this post may be outdated and links contained in the post may no longer work.****
i know this has probably been asked and answered, i need to capture the duration of the off time for one prox in seconds..
Created Date: October 14,2012
Created by: bcarlton
Attached is a PDF of your request. Note that the captured time has a possible inaccuracy of +- 1 scan time. It can be different on each capture.
If the interrupt capability allowed rising and falling interrupts then a better measurement could be done.
Assuming that the prox off times are expected to be the same you may want to average a number of readings.
Edit - the time would be in number of milliseconds in this form. Change the time base of the timer for expected off times longer than 32 seconds.
Created Date: October 14,2012
Created by: quaizywabbit
thank you very much sir...now that i see it it makes sense....:)
Created Date: October 14,2012
Created by: quaizywabbit
i know this has probably been asked and answered, i need to capture the duration of the off time for one prox in seconds..