adccommunitymod (AutomationDirect) asked a question.
Created Date: December 04,2017
Created By: Tom@Pton
**** This post has been imported from our legacy forum. Information in this post may be outdated and links contained in the post may no longer work.****
I have a GS2 on my submersible well and recently connected a spare used EA7-T10C to monitor pressure, amp, and HZ. Just because I wanted to. I generated a line trend graph and in the process found that my well would cycle every so many minutes on pressure drop. Occasionally it would stay On. That was an easy fix, the other is a leaking Taco valve on the pump and dump Heat Pump. Not so easy. Pressure switch is DI3. Heat pump is DI1 and results in constant pressure. I would like to monitor when either input is active, ie indicator lights but haven’t figured out how. It should be simple but... Can someone point me in the right direction? I am using a GS-Edrive. HMI indicating lights, not stand alone.
Created Date: December 04,2017
Created by: Tom@Pton
I have a GS2 on my submersible well and recently connected a spare used EA7-T10C to monitor pressure, amp, and HZ. Just because I wanted to. I generated a line trend graph and in the process found that my well would cycle every so many minutes on pressure drop.
Occasionally it would stay On. That was an easy fix, the other is a leaking Taco valve on the pump and dump Heat Pump. Not so easy.
Pressure switch is DI3. Heat pump is DI1 and results in constant pressure. I would like to monitor when either input is active, ie indicator lights but haven’t figured out how. It should be simple but...
Can someone point me in the right direction?
I am using a GS-Edrive.
HMI indicating lights, not stand alone.
Created Date: December 04,2017
Created by: kewakl
Can you read DI1 and DI3 into the EA7 use the EA7 event manager to turn on/off the indicators on screen?
Created Date: December 04,2017
Created by: Tom@Pton
Can you read DI1 and DI3 into the EA7 use the EA7 event manager to turn on/off the indicators on screen?
That is what I want to do, but haven’t figured out what code? parameter? I should look for on the GS2.
Created Date: December 04,2017
Created by: kewakl
I don't see any parameter that we could read for Dig In.
Created Date: December 04,2017
Created by: Tom@Pton
Well, that makes two of us. Thanks.
Created Date: December 04,2017
Created by: Tom@Pton
I’ll use the event manager and work an indicator via that.