adccommunitymod (AutomationDirect) asked a question.
6 Screens to One PLC
Created Date: March 09,2010
Created By: kenta
**** This post has been imported from our legacy forum. Information in this post may be outdated and links contained in the post may no longer work.****
Hi all, Looking at using 6-7 Cmore Screen's with a Controllogix PLC... I was wandering if I should use the Pass-through Option, or let each Screen talk to the PLC... I'm looking at trying the Pass-through, All Screen's are identical so maybe it will be the best bet. Any suggestions? Thanks, Jason
Created Date: March 09,2010
Created by: krak
I find that allowing all the screens to get to the plc works fine. You may want to play around with the poll rate though.
Edit: I’m assuming that every device will be on an Ethernet network.
Created Date: March 09,2010
Created by: kenta
Hi all,
Looking at using 6-7 Cmore Screen's with a Controllogix PLC...
I was wandering if I should use the Pass-through Option, or let each Screen talk to the PLC...
I'm looking at trying the Pass-through, All Screen's are identical so maybe it will be the best bet.
Any suggestions?
Thanks,
Jason